home *** CD-ROM | disk | FTP | other *** search
- DocDump V3.6 ReadMe 10-Dec-1992
-
- If you want to print the DocDump manual with DocDump, then set 'Lines/Page'
- to 60, 'Support FF On', 'Chop LF Off' and 'Chars/Line' must be 62 for best
- results.
-
- The EpsonX (DD)printer driver is used when DD starts up. If your printer is
- not Epson-compatible you must load an other driver, or make a new one. If so,
- read the manual first.
-
- The DocDump printer drivers:
-
- EpsonX driver:
-
- Works fine with all Epson compatible printers that support a combination of
- Condensed and Elite-style characters.
- Columnwidth: 160
- Lines/Sheet: 135-161
- Printers: Epson LX400/800, Epson FX1050, Star LC20, Star NL10 etc....
-
-
- EpsonFX driver:
-
- For printers that support condensed-style characters only.
- Columnwidth: 137
- Lines/Sheet: 135-161
- Printers: Epson FX80, and older printers.
-
-
- AnsiX3.64 driver:
-
- This driver uses the printer device (PRT:). Consider making
- a DD-driver for your printer instead of using this one, a DD-driver produces
- far better results.
- Columnwidth: 137
- Lines/Sheet: 74-90
- Printers: All, assumed that there is an Amiga-type printer driver available.
-
-
- OldDDV2.1 driver:
-
- This driver is used in DocDump V2.1. It is the same as the
- EpsonX driver, except for the linespacing, which is 17/216 inch instead of
- 15/216 inch.
- Columnwidth: 160
- Lines/Sheet: 120-144
- Printers: See EpsonX
-
- At the moment I am working on the HPDeskjet and Laserjet Series II & III SI
- printer drivers. I will release them somewhere in '93.
-
- If you have written a nice DD-printer driver, let me know.
-
- ===End===
-
-